We offer a wide range of laminar air flow in vertical pattern to provide solutions to various industries. Our range of laminar air flow (vertical) have the following features :

• Structure made of 19 mm Thick Plyboard covered with sunmica from outside.
• Work bench of perforated stainless steel.
• Sides of work bench covered with transparent acrylic sheet.


• Front acrylic door of collapsible type.


• Properly balanced blowers fitted on 1/4 H.P.


• Electric motor provided on the top portion to supply sufficient air to HEPA filter provided on top of work bench horizontally to supply clean air to the work bench vertically.


• Pre-filters provided on the top to supply pre filtered air to the blowers.


• One flourscent tube and one U.V. Germicidal tube provided over work bench.


• Static pressure manometer fitted on top.


• Back cover fixed with screws for convenient removal for attending blowers, filters and motor when needed.

Apart from that our range of clean air equipments are available in the following specifications:

• RH-57-01Working area Size 90 x 60 x 60 cm.
• RH-57-02Working area Size 90 x 60 x 60 cm.


• RH-57-03Working area Size 120 x 60 x 60 cm.
• RH-57-04Working area Size 180 x 60 x 60 cm.


• RH-57-05Exhaust System for Laminar Air Flow (Vertical)

Our company is also engaged in the manufacturing of varied range of laminar air flow (horizontal) equipments, which are known for their best quality performance and the durability it conatains. Our range of laminar air flow (horizontal) have the following features:

• It work-bench made of thick ply-board covered with stainless steel sheet.
• HEPA Filter provided vertically on back of the work bench horizontally.
• Blowers, motor and pre-filters fitted in lower portion of the cabinet.

Apart from that, our range of products are available in the following
specifications:

• RH-58-01 Working area size 60 x 60 x 60 cm.
• RH-58-02Working area size 90 x 60 x 60 cm.
• RH-58-03Working area size 120 x 60 x 60 cm.
• RH-58-04Working area size 180 x 60 x 60 cm.

ALTERNATIVE OPTIONS:

• Complete Structure made of Stainless Steel.
• Structure made of M.S. With S.S. Work Bench.

We offer a wide range of filters which find a great place in various industries including agricultural universities, education institutions, research institutions, pharma industries and others. Some of the specifications of our range of equipments are as follows:

• RH-56-01HEPA Filter60x60x15cm


• RH-56-02HEPAFilter 90x60x15cm


• RH-56-03HEPAFilter 120x60x15cm


• RH-56-04Pre Filter 60x60x5cm


• RH-56-05Pre Filter 90x60x5cm

Our company offer a wide range of fume hood, which are helpful for various industries in their different operations. Some of the features of our fume hood includes:

• Fume hood made of stainless steel. 304grade from outside and 316 grade inside acid resistant.


• The work surface is fitted with small wash basin with good quality tap.


• A gas cock is also fitted for gas supply.


• A sliding slash made of toughened glass moves vertically up and down with concealed counter balanced weight.


• Chamber is fitted with 20W fluorescent light.


• Space underneath the work station is provided with storage compartment.


• 15/5 Amp socket with switches is provided for light and exhaust system, supplied with cord and plug to work on 220/440volts 1/3 phase
  50HzA.C.


• Complete with exhaust system and stainless steel Deck & Duct to take out fumes.

Apart from this, our range are available in the following specifications:

• RH-60-01Working area size 90 X 60 X 60 cm.


• RH-60-02Working area size 120 X 60 X 60 cm.


• RH-60-03 Working area size 120 X 75 X 75 cm.


• Structure made of M.S. With S.S. Work Bench.